How to clean fake jewellery

Artificial jewellery conveys a fashionable statement without emptying your wallet. But it takes work to keep it looking stunning. This is the reason we’re going to explain how to clean fake jewellery in this article. Artificial or imitation jewelry’s complex designs are readily clogged with dirt and grime. Additionally, they could become stained by water, sweat, air, and body creams. It is possible to deal with everything.

Easy Hacks to clean Fake jewellery

1: Lemon Juice

Lemons are inherently acidic, which makes it easier to remove the oxide layer from jewellery.

Method

• Lemon juice and water should be combined equally.
• For 10 to 15 minutes, let the jewellery soak in this mixture.
• Use a rough cloth or toothbrush to gently scrub the jewellery.
• Rinse it under cool running water, then wipe it dry with a soft cloth.

2: Mild Dishwashing Liquid

One of the simplest and safest ways to clean your fake jewellery at home is using this solution.

Method

• In a bowl, combine some dishwashing soap and warm water.
• For 10 to 20 minutes, soak your jewellery in this solution to help remove accumulated dirt and grime.
• Use a toothbrush to delicately clean your jewelery. Don’t overlook the tight spaces and difficult spots.
• Your jewellery should be washed in cool water and dried with a gentle towel.

3: Salt and Baking Soda

Using baking soda to clean up stains will restore the gleam to your costume jewellery. For delicate stones, apply this technique sparingly to prevent weakening the glue and total damage.

Method

• Put your necklace on a piece of aluminium foil, shining side up.
• In a bowl, combine one tablespoon of salt and baking soda with one cup of warm water.
• Pour this liquid over the jewellery that is positioned over the foil.
• After a few minutes, turn it off when you notice that the bubbles on your jewellery have subsided.
• With your fingers, gently rub the jewellery, then wash it in cold water.
• With a fresh cloth, completely dry your jewellery.

4: White Vinegar with Water

The most secure and suggested at-home jewellery cleaner is a vinegar-and-water mixture. However, if your jewellery is highly set with stones, shorten the soak time and pat it dry with a microfiber cloth.

Method

• In a basin, combine white vinegar and water in equal parts.
• Spend 15 to 20 minutes soaking your jewellery in this solution.
• With an old toothbrush, thoroughly clean the wet jewellery.
• Rinse it under cool running water, then wipe it dry with a soft cloth.

If the jewellery is extensively stone-studded, another option is to use a sponge rather than a toothbrush. After rinsing, add a few drops of olive oil to make the stones sparkle.

5: Toothpaste

Even the toughest stains and filth can be removed from every crevice of your jewellery piece with the help of the toothpaste’s abrasive texture.

Method

• Apply toothpaste in a thin layer and gently coat your jewelery.
• Use the bristles to move through the complex patterns.
• Rinse the jewellery in cool water that is running.
• Before storing, buff dry with a clean towel.

6: Baby Shampoo

One of the gentlest solutions for cleaning jewellery with stones or pearls is baby shampoo.

Method

• In a bowl, combine baby shampoo and water in an equal ratio.
• Use a toothbrush or Q-tip to gently scrub your jewels after dipping them into this diluted solution.
• The ideal cleaning tool for jewellery with complicated grooves is a toothbrush since it can readily reach places that are difficult to clean.
• Quickly rinse your jewellery in lukewarm water, then quickly dry it with a microfiber cloth or a fresh towel.

7: Alcohol for rubbing

The safest and most efficient cleaning solution for fake jewellery is rubbing alcohol. It will aid in preserving the sheen of your precious stones and brilliant metals. Rubbish removal fluid (rubbing alcohol) can be used to remove smudges, spots, and tarnished surfaces off artificial objects.

Method

• Fill a bowl with rubbing alcohol. Make that there is enough of it to soak your jewellery.
• For about 15 minutes, let your jewellery pieces soak in rubbing alcohol. As the brim approaches, bubbles and muck will be visible.
• Check each piece of jewellery after removal to see whether any are still dirty. You can either wait a few more minutes or give your jewellery a quick brush with a toothbrush.
• Set the pieces out to air dry for 15 minutes before storing them without washing.

8: Optical Contact Solution

Your manufactured or imitation jewellery will sparkle like new thanks to the cleaning power of contact lens solution.

Method

• In a small dish, dilute the lens solution with some room-temperature water.
• Use this solution to dampen a delicate cloth, then use it to gently wipe your jewellery.
• Once washed, rinse them under cold water or wipe them off with a soft, clean cloth.

9: Club Soda 

For cleaning jewellery made with diamonds, emeralds, rubies, and sapphires, club soda is typically employed. However, if used properly, it can also make your faux jewellery look shiny.

Method

• Put your imitation jewellery in a bowl of club soda and let it sit there for an hour.
• Verify it once to make sure the stains and dirt are gone.
• Wash your jewellery with cold water and let it dry.

10: Ammonia Solution

When applied properly, ammonia can help keep your expensive artificial jewellery appearing brand new. It eliminates tarnish and makeup, cream, and lotion accumulation.

Method

• Mix six parts of warm water with one part of ammonia.
• Spend at least 10 minutes soaking your tarnished faux jewellery in this solution.
• Use an old toothbrush to gently clean the jewelry’s nooks and crannies.
• After another 10-minute soak, give it another brushing.
• Another solution can be made by combining one part ammonia, six parts warm water, and a few drops of baby shampoo or mild dish soap. The solution should be stirred until frothy.
• The jewellery items should soak in this mixture for ten minutes.
• Rinse them off completely under running water
• Dry it in a soft, clean cloth.

11: A bubble bath with saltwater

Your jewellery will look brand new after taking a warm bubble bath with salts. However, be sure your jewellery is suitable for a saltwater solution before you begin. Be cautious when handling fake stones because salty water might cause them to lose their brilliance. If your jewellery consists only of chains, rings, and bracelets, you can still use this method.

Method

• Turn a basin of water and bath salt into a frothy mixture.
• Spend a few minutes soaking your jewellery in it, then scrub it well with a brush.
• Take off the jewellery and put it in a bowl of fresh water.
• Your items should be rinsed and dried with a fresh towel.
• Air-dry your jewellery before keeping them.

Main Points

• Artificial jewellery may give your outfit the same glimmer and brilliance without breaking the bank.
• In order to maintain their appearance, brightness, and lustre, they must be cleaned and maintained properly.
• A few simple household materials, such as vinegar, baking soda, dishwashing liquid, or even baby shampoo, might be useful for cleaning your faux jewellery successfully.

Summary

Artificial jewellery is a fashionable statement that won’t break the bank. But maintaining its lustre is difficult. Artificial or fake jewellery typically attracts dirt and dust due to the detailed designs. Additionally, exposure to water, sweat, air, and body creams may cause them to turn discoloured. This article about cleaning fake jewellery might be a very helpful resource for you. By using everyday items like baking soda, vinegar, and baby shampoo, you may make your fake jewellery sparkle by using the above-mentioned easy hacks.